Planning Permission Advice Scottish Provident Building, 7 Donegall Square West, Belfast BT1 6JH 028 9591 6888 info@niplanningpermission.co.uk

20 November 2026 · Before you apply

Planning Drawings: What the Council Expects to See

The drawings are the heart of a planning application. They are what the case officer assesses, what neighbours look at and what the permission eventually approves. Getting them right first time avoids delays at validation and confusion later.

This article explains the drawings that a Northern Ireland council usually expects, what each one is for, and the mistakes that most often hold applications up. It is a general guide. Individual councils publish their own validation checklists, and the exact requirements depend on the type of proposal.

The site location plan

Every application needs a site location plan. It is a map, usually at 1:1250 or 1:2500, that shows where the site is in relation to surrounding roads and buildings. The application site should be outlined clearly in red, including the land needed for access to a public road and any visibility splays. Other land owned by the applicant nearby is usually outlined in blue.

The red line matters more than people expect. If the entrance, the sight lines or the septic tank and soakaway sit outside it, the council may not be able to attach the conditions it needs, and the application may be returned or refused.

The block plan or site layout

A block plan, typically at 1:500 or 1:200, shows the proposal within its plot: the building footprint, distances to boundaries, the position of neighbouring buildings, parking, access, landscaping, and drainage for rural sites. For a new house in the countryside it often shows existing hedges and trees to be kept, which matters for integration into the landscape.

Floor plans

Existing and proposed floor plans, usually at 1:100 or 1:50, show the layout of each floor and the use of each room. For an extension, the plans should make clear which walls are existing and which are new. For a change of use, they show how the building will work in its new use, for example bedroom sizes in an HMO or the arrangement of flats.

Elevations

Elevations show each side of the building as it would look from outside. Councils normally want existing and proposed elevations of every side affected, with materials and finishes noted: render colour, roof tiles or slates, window materials. Elevations are where most design discussions happen, so clarity helps.

Sections and roof plans

A section is a cut through the building, showing floor levels, ridge height and how the building sits on the ground. Sections are particularly important on sloping sites, for dormers and loft conversions, and wherever overlooking or overshadowing might be raised. A roof plan helps with complicated roof shapes and dormers.

Other drawings that are sometimes needed

  • Street elevations showing the proposal next to neighbouring buildings, often requested in towns and conservation areas.
  • Landscaping plans for rural houses and larger schemes.
  • Visibility splay drawings showing sight lines at the entrance, required by DfI Roads for new or altered accesses. See site access and DfI Roads.
  • Drainage layouts showing septic tank or treatment plant positions and soakaways where there is no mains sewer.
  • Sign drawings for advertisement consent, showing size, height and illumination.

The basics every drawing should have

  • A scale, a scale bar and the paper size, so the council can measure from it.
  • A north point on plans.
  • A title, drawing number and revision letter.
  • Dimensions for key measurements, such as the depth of an extension and distance to boundaries.
  • Consistency. The plans and elevations must match each other, and the red line must match the form.

Common mistakes

  1. Missing existing drawings. The council needs to understand what is there now, not just what is proposed.
  2. Red line too tight. Leaving out the access or the visibility splays.
  3. Neighbouring buildings not shown. Case officers need to see the relationship with windows and gardens next door.
  4. Inconsistent revisions. Amended drawings that do not update every affected sheet.
  5. Design that ignores the policy. Drawings can be technically perfect and still fail if the design has not been shaped by the policy test, for example the rural design guidance or the extension policy that the council uses. Our guide to which plan applies to your site explains where the tests come from.

Who prepares the drawings?

Anyone competent can prepare planning drawings, but they need to be accurate and to scale. When you instruct us, we arrange drawings prepared for the application by our design technicians, working from a measured survey where needed, and we review them against the policy before submission. If you already have drawings from someone else, we can check them before they go in.

After approval

The approved drawings are listed on the decision notice and become part of the permission. Build what is shown. If the design changes, check first whether the change needs a new application. See after a planning decision.

Ask us first: the first conversation is free

Tell us the address or postcode and what you have in mind. We will say whether you are likely to need permission and what the sensible next step is. Ring 028 9591 6888 or email info@niplanningpermission.co.uk.

Call now028 9591 6888 Emailinfo@ Free advicecontact form